Power HAD EX CCD sensor delivers FIT performance at the price level of IT
The BVP-E30PH employs a new generation of CCD imager, the Power HAD EX sensor. This achieves high sensitivity (F11 2000 Lux), low noise (65 dB, PAL) and low vertical smear (<-145dB) together with extremely wide dynamic range

New 14 bit A/D Convertor
The BVP-E30 series cameras incorporate the latest 14 bit Analogue to Digital Convertor technology, together with new generation Advanced Digital Signal Processing LSIs to provide unmatched quality and signal resolution. The use of 14 bit A/D technology allows the full 600% dynamic range of the CCD to be captured without requiring pre-knee compression. At the same time power consumption is still very low, just 13 Watts.

Comprehensive control capability
The totally new digital processing in the BVP-E30PH includes all the control functions required for sophisticated studio and OB acquisition. Control parameters include 3-Colour Skin Detail (with auto detection), Auto Trace White balance, Multi Matrix (which allows independent hue and saturation adjustment for up to 15 different colour ranges), and electronic soft focus. For stand-alone operation, all settings can be controlled using viewfinder menus

New Control Functions
The BVP-E30 series cameras include several new functions, to provide even greater versatility. A Digital Linear Saturation control allows complete control of picture colour saturation, from normal to zero (monochrome). A unique 4 pixel accumulation CCD readout mode allows shooting in very low light levels. Maximum gain is now +42 dB, with a minimum illumination of 0.25 lux (F1.4). A new Slow Shutter mode can also be used. By increasing exposure times up to 7 frames, still images may be captured at even lower light levels, as low as 0.04 lux. The slow shutter function can also be employed for special effects, capturing a characteristic blurred motion effect on moving subjects, or when zooming in or out.

Wide dynamic range allows operation in high contrast lighting situations
The excellent highlight handling provided by the Power Had EX CCD sensors, together with 14 bit A/D convertors and Advanced Digital signal Processing, ensure that the BVP-E30PH delivers an exceptional dynamic range. A 2nd generation adaptive knee circuit, and adjustments for gamma, black gamma, knee saturation and low-light saturation allow the camera to easily handle the severe lighting contrast frequently encountered in OB use

Superb ergonomics
The BVP-E30PH is lightweight, compact, and comfortable in operation. Switches are laid out for simple, convenient operation, and their positions are familiar for users of other Sony cameras. Two switches on the carrying handle can be used to control intercom or return viewfinder selection, while the carrying handle has been redesigned for comfortable operation, with a non-slip artificial leather grip. The BVP-E30PH now includes an adjustable shoulder pad, to provide adjustment for different lenses.

Advanced filing system
A comprehensive file system allows users to store frequently used settings for quick access. Reference file, lens files, and scene files can all be controlled from the Master Setup Unit, while the control panels include a 'Standard' button to quickly recall the default settings for the camera. Files can be quickly transferred between cameras if required. A new Memory Stick slot on the camera allows user settings to be quickly stored at the camera head.

Wide choice of system models and accessories
The BVP-E30 family includes a choice of peripherals to suit every requirement:

•Four viewfinders - 1.5 inch or 2 inch monocular, 5 inch and 7 inch studio/OB type
•Two triax Camera Control Units
•Two Master Setup Units
•Six Remote Control Panels

Viewfinder Information Superimposed on Test output
It is now possible to superimpose character display, safe area and centre markers, and box cursors onto the test output of the camera, enabling a monitor to be used as an additional viewfinder. Display settings are the same as for the main viewfinder

Cost effective acquisition
The considerable expertise which Sony has in the key areas of CCD technology and Digital Signal Processing ensures that the BVP-E30PH offers extremely high picture quality at a significantly lower price than conventional broadcast cameras.

Versatile system for Studio or Outside Broadcast applications
The BVP-E30PH camera is a small, light portable camera ideal for all applications. The camera includes a totally new 14 bit A/D convertor and Advanced Digital Signal Processing, and these deliver significant improvements in performance. The combination of extremely low noise, high sensitivity and high gain settings permits operation in light levels as low as 0.25 lux, allowing the camera to cope with the most stringent OB requirements. At the same time, it delivers a level of picture quality to exceed even critical studio requirements.

Adaptable to users’ requirements
The BVP-E30PH camera system includes numerous automatic functions, including Auto Trace White balance to allow simple operation and reduce the need for careful control supervision. However, the control system also allows manual adjustment of a wide variety of signal parameters, providing maximum creative picture manipulation.

Flexibility
The BVP-E30PH camera is just a part of a versatile range of camera system products that allow a system to be tailored to customers’ precise requirements. This system includes a choice of viewfinders, triax CCUs, Master setup units and operator control panels.

Unrivalled picture quality
The BVP-E30PH camera uses a new 14 bit Analogue to Digital Convertor (ADC), and state-of-the-art digital signal processing LSIs to provide exceptional performance and avanced control functions. The imager used is an updated version of the proven Power HAD EX CCD sensor, which achieves low noise, high sensitivity, and accurate colorimetry. These technologies ensure the BVP-E30PH delivers unrivalled picture quality, excellent highlight handling, and high resolution.

Quick set-up to suit varying conditions
A comprehensive filing system allows the rapid storage and recall of camera settings from the Master Setup Unit (MSU) or Remote Control Panel (RCP). To allow operators to adapt the camera to different operation styles, Operator settings can also be conveniently stored using a Memory Stick slot on the camera head.

Supply voltage
 DC 11~17V
 
Power Consumption
 13 W
 
Operating temperature
 -20~+45C
 
Storage temperature
 -20~+60C
 
Size (mm)
 125 (W) x 285 (H) x 291 (D) without projection
 
Weight
 2.4 Kg/3.1 Kg: camera only/including mic and viewfinder

CCD Sensor type
 2/3" Power HAD EX
 
Total pixels
 1038 x 1188
 
Effective pixels
 980 x 582
 
Dynamic Range
 600%
 
Optical Filters
 1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND: Note: BVP-E30PH has only a single, manually operated filter wheel